{"product_id":"aa-rzr-pro-r-4-cylinder-launch-control-module","title":"AA RZR Pro R 4 Cylinder Launch Control Module","description":"\u003cp\u003eThe Aftermarket Assassins Launch Control Module holds a set RPM at the line on the 2022 to 2026 Polaris RZR Pro R 4 cylinder, building boost on turbo machines or RPM on naturally aspirated ones, for drag racing and other racing starts.\u003c\/p\u003e\u003ch3\u003eWhy it holds up\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDeveloped with DynoJet, with AA wiring, programming, tune and tech support\u003c\/li\u003e\n\u003cli\u003eAA reports up to double the plenum pressure compared to brake boosting alone, depending on launch RPM, for faster turbo spool and acceleration\u003c\/li\u003e\n\u003cli\u003eLaunch RPM is programmed by AA and can be changed with a Windows computer and DynoJet C3 software\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2022 to 2026 Polaris RZR Pro R 4 cylinder models only, 2 and 4 seat\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDynoJet launch control module, programmed by AA\u003c\/li\u003e\n\u003cli\u003eAA wiring harness with launch switch\u003c\/li\u003e\n\u003cli\u003eUSB cable for adjusting launch RPM\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires an AA custom tune (PV3, HP Tuners, or ECU bench flash) to work with this AA wired and tuned module. Read the full description before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2000 RPM:\u003c\/strong\u003e For AA standard naturally aspirated clutch kits that engage at roughly 2000 RPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2500 RPM:\u003c\/strong\u003e For AA turbo clutching that engages around 2500 RPM.\u003c\/li\u003e\n\u003cli\u003eChoose the 2 seat or 4 seat version to match your machine.\u003c\/li\u003e\n\u003cli\u003eAA highly suggests the AA primary clutch, since the stock clutch may not hold up to launch control, especially above 2000 RPM. Use caution with the OEM clutch.\u003c\/li\u003e\n\u003cli\u003eSet launch RPM right at clutch engagement. To find engagement, put the machine in high range on flat ground, press the gas slowly and note the RPM where it starts to move. Repeat a few times for a consistent number.\u003c\/li\u003e\n\u003cli\u003eAfter install, try launch control without holding the brake. The machine should barely want to move. If it lurches, go to a higher stall spring, a fresh clutch spring, or a lower launch RPM.\u003c\/li\u003e\n\u003cli\u003eTo launch: start the machine and let it idle (the module will not engage above 1500 RPM). Press and hold the launch switch and go full throttle. The machine holds launch RPM. Most riders hold the brake too. Drop the brake and the switch at the same time to go.\u003c\/li\u003e\n\u003cli\u003eTo change launch RPM: install the DynoJet C3 software on a Windows computer, connect the module with the supplied USB cable, open Configure, then Feature Enables and Inputs Selections, then Launch Control. Change the target RPM and click Send.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aftermarket Assassins","offers":[{"title":"117-96070009-2-2000","offer_id":67929875578974,"sku":"117-96070009-2-2000","price":475.0,"currency_code":"USD","in_stock":true},{"title":"117-96070009-2-2500","offer_id":67929875611742,"sku":"117-96070009-2-2500","price":475.0,"currency_code":"USD","in_stock":true},{"title":"117-96070009-4-2000","offer_id":67929875644510,"sku":"117-96070009-4-2000","price":475.0,"currency_code":"USD","in_stock":true},{"title":"117-96070009-4-2500","offer_id":67929875677278,"sku":"117-96070009-4-2500","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/2406\/7678\/files\/Launch20Control20-20Pro20R20web.jpg?v=1793848186","url":"https:\/\/bonafidesxs.net\/products\/aa-rzr-pro-r-4-cylinder-launch-control-module","provider":"Bona Fide SXS","version":"1.0","type":"link"}