{"product_id":"aa-rzr-pro-xp-turbo-r-pro-s-launch-control-module","title":"AA RZR Pro XP\/Turbo R\/Pro S Launch Control Module","description":"\u003cp\u003eThe Aftermarket Assassins Launch Control Module builds boost at the starting line on 2020 and newer Polaris RZR Pro XP, Turbo R and Pro S models, for drag racing, other racing, or just fun.\u003c\/p\u003e\u003ch3\u003eWhy it holds up\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDeveloped with DynoJet, with AA wiring, switch, programming, tune and tech support\u003c\/li\u003e\n\u003cli\u003eBrake boosting alone makes around 7 to 8 PSI in the plenum. With launch control AA sees 14 to 17 PSI, depending on launch RPM, for much faster spool and acceleration.\u003c\/li\u003e\n\u003cli\u003eOn the PV3 gauge, boost goes from negative to positive pressure at the line\u003c\/li\u003e\n\u003cli\u003eLaunch RPM is programmed by AA and can be changed with a Windows computer and DynoJet C3 software\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2020 and newer Polaris RZR Pro XP, Turbo R and Pro S models only, 2 and 4 seat\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDynoJet launch control module, programmed by AA\u003c\/li\u003e\n\u003cli\u003eAA wiring harness with launch switch\u003c\/li\u003e\n\u003cli\u003eUSB cable for adjusting launch RPM\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAA custom tunes for a PV3 device are required to work with this AA wired and tuned module. Read the full description before ordering.\u003c\/li\u003e\n\u003cli\u003eAA tunes bought before August 25, 2020 need an update to the latest version, which desensitizes misfire so the machine does not go into limp mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2000 RPM:\u003c\/strong\u003e For AA clutch kits that engage at roughly 2000 RPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2300 RPM:\u003c\/strong\u003e Requires the AA gray and white spring on the P90X clutch, or the teal spring with the AA HD primary clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2500 RPM:\u003c\/strong\u003e Do not run on the OEM primary. Run only with the AA solid blue spring in the AA HD primary clutch.\u003c\/li\u003e\n\u003cli\u003eChoose the 2 seat or 4 seat version to match your machine.\u003c\/li\u003e\n\u003cli\u003eAA highly suggests the AA primary clutch, since the stock clutch may not hold up to launch control, especially above 2000 RPM. Use caution with the OEM clutch.\u003c\/li\u003e\n\u003cli\u003eSet launch RPM right at clutch engagement. To find engagement, put the machine in high range on flat ground, press the gas slowly and note the RPM where it starts to move. Repeat a few times for a consistent number.\u003c\/li\u003e\n\u003cli\u003eAfter install, try launch control without holding the brake. The machine should barely want to move. If it lurches, go to a higher stall spring, a fresh clutch spring, or a lower launch RPM.\u003c\/li\u003e\n\u003cli\u003eTo launch: start the machine and let it idle (the module will not engage above 1500 RPM). Press and hold the launch switch and go full throttle. The machine holds launch RPM. Most riders hold the brake too. Drop the brake and the switch at the same time to go.\u003c\/li\u003e\n\u003cli\u003eTo change launch RPM: install the DynoJet C3 software on a Windows computer, connect the module with the supplied USB cable, open Configure, then Feature Enables and Inputs Selections, then Launch Control. Change the target RPM and click Send.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aftermarket Assassins","offers":[{"title":"117-96070006-2-2000","offer_id":67929877512286,"sku":"117-96070006-2-2000","price":450.0,"currency_code":"USD","in_stock":true},{"title":"117-96070006-2-2300","offer_id":67929877545054,"sku":"117-96070006-2-2300","price":450.0,"currency_code":"USD","in_stock":true},{"title":"117-96070006-2-2500","offer_id":67929877577822,"sku":"117-96070006-2-2500","price":450.0,"currency_code":"USD","in_stock":true},{"title":"117-96070006-4-2000","offer_id":67929877610590,"sku":"117-96070006-4-2000","price":450.0,"currency_code":"USD","in_stock":true},{"title":"117-96070006-4-2300","offer_id":67929877643358,"sku":"117-96070006-4-2300","price":450.0,"currency_code":"USD","in_stock":true},{"title":"117-96070006-4-2500","offer_id":67929877676126,"sku":"117-96070006-4-2500","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/2406\/7678\/files\/Launch-Control-1web_49866651-7cee-4131-9759-4f72d7ca6b58.jpg?v=1793848194","url":"https:\/\/bonafidesxs.net\/products\/aa-rzr-pro-xp-turbo-r-pro-s-launch-control-module","provider":"Bona Fide SXS","version":"1.0","type":"link"}