2016-19 Defender HD10 Stage 1 Lock & Load Kit

The Aftermarket Assassins Stage 1 Lock & Load Kit pairs AA tunes on a Power Vision 3 tuner with the AA S1 clutch kit for the 2016 to 2019 Can-Am Defender HD10. This motor likes to rev more than the factory allows, and the tune and clutching together deliver real gains at the wheels.

Why it holds up

• Level 1 gains 3 to 4 RWHP on stock clutching, and 6 to 7 RWHP over stock when clutched for 6400 to 6700 RPM at 45 to 50 MPH
• Exhaust plus Level 2 tune with clutching totals 9 to 10 RWHP over stock
• Throttle, fuel, timing and torque tables reworked, with more throttle available in low range
• Rev limit raised from 8000 to 8500 RPM and fan on and off temps lowered from 203 and 198 to 185 and 180 degrees Fahrenheit
• Safety parameters that protect the motor stay in place

Fits

• 2016 to 2019 Can-Am Defender HD10, all models
• Does not fit 2020 and newer models

In the box

• Power Vision 3 tuner loaded with AA tunes
• AA S1 clutch kit: helix and secondary spring

Good to know

• Level 1 is for stock exhaust systems only and Level 2 is for aftermarket slip on or full exhaust systems only. Both come in 87 octane and 91 to 93 octane versions.
• Winter tunes that run hotter but safe coolant temps are available for cab and heater machines in cold climates.
• Speed limiters removed and optional seatbelt limiter disabled. The gauge cluster still shows the seatbelt warning.
• The tuner flashes the ECU in roughly 8 to 10 minutes over the diagnostic port, switches tunes, returns to stock, and works as a live gauge and data logger.
• AA notes the OEM muffler limits power over about 50 MPH dyno speed and highly suggests the AA muffler for sustained pulls.