2016-26 Can-Am Defender HD10 AA Custom tunes for Power Vision CX, 3 & 4

Aftermarket Assassins custom tunes for the 2016 to 2026 Can-Am Defender HD10, built for the Power Vision CX, 3 or 4 you already own. Level 1 adds 3 to 4 RWHP on stock clutching, and with limiters removed and quicker throttle response it feels like more.

Why it holds up

• Throttle by wire tables modified for better response, especially in high range, with low range left mild for crawling
• More low range throttle than stock, which does not allow 100% throttle in low
• Fuel and timing tables modified for low end punch and safe air fuel ratios
• Fan on and off temps lowered from the factory 203 and 198 to 185 and 180 degrees Fahrenheit
• Rev limit raised from 8000 to 8500 RPM, with safety parameters that protect the motor still in place

Fits

• 2016 to 2026 Can-Am Defender HD10 V-Twin models
• Does not fit 2027 3 cylinder models

In the box

• AA custom tune files for your Power Vision, sent by email. No hardware ships with this order.

Good to know

• Clutched for 6400 to 6700 RPM at 45 to 50 MPH in high range, gains reach 6 to 7 RWHP over stock. Adding exhaust and the Level 2 tune with clutching totals 9 to 10 RWHP over stock.
• Level 1: for stock exhaust systems only. Available in 87 or 91 to 93 octane.
• Level 2: for aftermarket slip on or full exhaust systems only. Available in 87 or 91 to 93 octane.
• Speed limiters removed. Optional seatbelt limiter disable; the gauge cluster still shows the seatbelt warning.
• Winter tunes with hotter but safe coolant temps are available for machines with cabs and heaters.
• This is a tune file for a Power Vision device you already own.
• After purchase, the store contacts you by email to collect your vehicle and Power Vision device information, then sends the tune files by email.
• Tuning a second vehicle with a PV4 requires an additional vehicle license, purchased through the Power Vision app.
• Tunes are final sale.