2018-20 RZR Turbo S 72" Wide S2 Recoil Clutch Kit

The Aftermarket Assassins S2 Recoil Clutch Kit sharpens acceleration and throttle response on the 2018 to 2020 Polaris RZR Turbo S, especially with a tune or larger tires and paddles.

Why it holds up

• Recoil weights adjust with simple magnets and carry a custom AA profile
• Nitrocarburized weights for wear resistance, fatigue strength and surface lubricity
• More efficient power to the wheels and more consistent clutch performance
• Cooler belt temps and longer belt and clutch life

Fits

• 2018 to 2020 Polaris RZR Turbo S
• Does not fit 2021 models

In the box

• AA Recoil magnetic adjustable clutch weights
• Setup guideline with brief install instructions

Good to know

• Works with stock or modified machines.
• Slightly higher engagement that stays smooth.
• Upgrade to the S3 kit later by adding the helix.
• Optional teal primary spring adds 200 to 300 peak RPM for paddles and sand and engages around 2100 to 2300 RPM.
• The only tool needed is the AA Compression Tool #1. Primary parts can be installed with the clutch on the machine.
• Many primary clutches are very tight on the tapered crank. If pulling the primary, grease the puller tip and threads well; a hammer may be needed.
• On 2018 models, the AA Snap Ring Delete Kit makes installation much easier.
• The AA Revolver Billet Clutch Cover does not fit with the AA Primary Clutch Fan Blade.