2018-22 X3 120HP Base Stage 1 Lock & Load Kit

The Aftermarket Assassins Stage 1 Lock & Load Kit pairs AA tunes on a Power Vision flash tuner with AA clutching for the non intercooled Can-Am Maverick X3 120HP base. The stock 120HP runs roughly 7 PSI of boost, and AA tunes raise boost for each level and setup.

Why it holds up

• Non intercooled Level 1 makes 140 to 145 crank HP at 9 to 10 PSI and runs all day without heat soaking the system
• Non intercooled Level 2 makes 150 to 155 crank HP at 10 to 11 PSI, the tune most riders run for maximum gains
• Tunes for an added intercooler with the stock fuel pump reach roughly 170 to 185 crank HP and are intercooler and fan ready with no extra harness
• Fixes the factory lean condition on boost, with boost, fuel and timing tables built for each level
• Rev limit raised from 8300 to 9000 RPM, and safety parameters for the motor and turbo stay in place

Fits

• 2018 to 2022 Can-Am Maverick X3 120HP base, non intercooled

Good to know

• The non intercooled tunes and stock fuel pump intercooler tunes run on 91 to 93 octane. Non intercooled Level 3 makes 160 to 165 crank HP at 12 to 13 PSI, is for short bursts only, and requires the wastegate shortened 2 turns (7 to 8 PSI).
• Non intercooled Levels 1 and 2 use the stock wastegate setting.
• Intercooler tunes with the stock fuel pump require a clutch kit and 7 to 8 PSI wastegate crack pressure. Level 3 with intercooler also requires an aftermarket exhaust (at least a cat delete).
• Machines with an intercooler and 172HP fuel pump have 6 tune levels available, from pump gas to race fuel to E85.
• Speed limiters removed with the white key and 2 foot limiters removed. The tuner flashes the ECU in roughly 8 to 10 minutes and returns to stock any time.