2022-Up Defender HD9 Stage 2 Lock & Load Kit

The Aftermarket Assassins Stage 2 Lock & Load Kit pairs AA tunes on a Power Vision 3, the AA Stage 1 clutch kit and the AA stainless steel slip-on exhaust for the 2022 and newer Can-Am Defender HD9. Stock machines only turn 5500 to 6000 RPM peak, and this combo lets you clutch for 6400 to 6700 RPM.

Why it holds up

• Gains of 9 to 10 RWHP when clutched for 6400 to 6700 RPM at 45 to 50 MPH with the AA tune and exhaust
• Level 2 tune available in 87 octane or 91 to 93 octane, with more low range throttle and revised throttle by wire tables
• Fan on/off lowered from 203/198°F to 185/180°F, speed limiters removed and rev limit raised from 8000 to 8500 RPM, with engine safety parameters still in place
• Stage 1 clutch kit uses an adjustable helix and stiffer secondary spring and leaves the primary alone for easier install
• PV3 reflashes the ECU in roughly 8 to 10 minutes over the diagnostic port, returns to stock at any time and works as a gauge and data logger

Fits

• 2022 and newer Can-Am Defender HD9, all models

In the box

• Dynojet Power Vision 3 (PV3) tuner with AA Level 2 tune
• AA Stage 1 clutch kit (helix and secondary spring) with installation and adjustment tools
• AA stainless steel slip-on exhaust
• Setup guideline

Good to know

• Best peak RPM is 6400 to 6700 at 45 to 50 MPH in high range.
• Included Level 2 tune is meant for aftermarket slip-on or full exhaust systems only.
• Works well with 27" to 33" tires and 28" to 32" paddles, and also with 34" to 35" tires.
• Gear reduction in the transmission or portals, or an aftermarket turbo kit, needs a fit check first.
• Contact us before you order so we can confirm fit.
• The seatbelt limiter disable is optional. The gauge cluster still shows the seat belt warning.
• Winter tunes are available for cab and heater setups in cold climates.