AA 2016-2020 RZR Turbo & 2018-22 RS1 Primary Clutch Fan Blade

The Aftermarket Assassins Primary Clutch Fan Blade adds airflow to the spring side of the primary clutch on the Polaris RZR Turbo and RS1 for a cooler running CVT and fewer blown belts.

Why it holds up

• Forces nearly 50 CFM more air through the clutch ducting than stock above 8200 RPM. AA measured 457 CFM against 407 CFM stock at 8200 RPM.
• Airflow improves from idle to wide open throttle and climbs with engine speed
• Adds support to the clutch towers for rigidity
• Anodized aluminum, weighing only 0.4 lb

Fits

• 2016 to 2020 Polaris RZR XP Turbo and Turbo S
• 2018 to 2022 Polaris RZR RS1
• Does not fit 2020 and newer Pro XP or Turbo R
• Does not fit 2021 RZR Turbo or Turbo S
• Works only with the stock primary clutch cover, not the AA Revolver Clutch Cover

In the box

• Primary clutch fan blade
• Longer mounting bolts

Good to know

• Installs right over the factory spring plate with the supplied longer bolts.
• In rare cases a slightly warped plastic clutch cover needs a small amount of clearancing where the bolts rub. Sandpaper or a die grinder handles it.
• AA reports this fan blade outflows a CVT blower from 5000 RPM and up.
• Part number 108-1016