AA Can-Am X3 Turbo Billet Wastegate Kit

The Aftermarket Assassins Billet Wastegate Kit is an adjustable wastegate actuator for Can-Am X3 turbo models, made for riders who need more crack pressure than the OEM wastegate allows or need to replace a worn actuator.

Why it holds up

• Adjustable from 6 to 11 PSI with the installed spring, with an optional 9 to 15 PSI spring included
• Can be set to true stock crack pressure so a stock X3 will not over boost
• Easy to adjust crack pressure when needed
• Replaces a worn actuator. Aged springs can cause low boost, less power and more heat.

Fits

• All 2017 and newer Can-Am X3 turbo models

In the box

• Billet wastegate actuator with installed 6 to 11 PSI spring
• Optional 9 to 15 PSI spring

Good to know

• Factory crack pressure is 6 PSI on 2017 X3 models and 7 to 8 PSI on 2018 and newer.
• The 6 to 11 PSI spring covers AA tunes that call for that crack pressure. Check the tune description for the right setting.
• A 14 to 18 PSI spring is sold separately for custom applications with a tune built for the higher pressure actuator.
• Install normally takes 15 to 20 minutes.
• Aftermarket Assassins highly suggests a wastegate pressure pump to set crack pressure correctly.
• Part number 115-1016-A