AA Overdrive Revolver Clutch Plate for Kawasaki Teryx H2

The Aftermarket Assassins Overdrive Revolver Clutch Plate for the 2026 Kawasaki Teryx H2 supercharged 250HP adds support for the clutch towers to help prevent failure and lets the clutch shift out further than factory. AA recommends it in place of the updated OEM support plate.

Why it holds up

• Adds support for the towers to greatly strengthen the clutch
• Much stronger billet than the OEM cast aluminum cover, which can crack under high RPM, belt slip or bolt tightening
• Run by AA at 9,500 to 10,000 RPM for many test periods and miles without issue
• CNC machined from 6061 aluminum in the USA

Fits

• All 2026 Kawasaki Teryx H2 supercharged 250HP models

In the box

• AA Overdrive Revolver clutch plate

Good to know

• Must be used with the AA clutch kit or weights. The ramp end on the OEM weights causes problems with this cover and makes it ineffective.
• Lower cruising RPM at speed, and a higher shift ratio so you spend less time in one spot on the clutch arms and sheaves, which helps clutch life.
• Top speed gains depend on load vs power, but AA normally sees 3 to 5 MPH more.
• Higher RPM clutching often costs a little top speed as you hit the rev limit sooner. This cover brings that back in most cases.
• Bolts on in place of the factory cover and does not change spring rate.