Can-Am Commander 1000R AA Custom Tunes for Power Vision 3 & 4

Aftermarket Assassins custom tunes for the Can-Am Commander 1000R, delivered as tune files for riders who already own a Dynojet Power Vision (PVCX, PV3 or PV4).

Why it holds up

• Level 1 gains 3 to 4 RWHP with stock clutching, with limiters removed and sharper throttle response
• Clutched for 7300 to 7500 RPM at 50 MPH, gains reach 6 to 7 RWHP over stock, and 9 to 10 RWHP with exhaust and the Level 2 tune
• Throttle by wire, fuel, timing and torque tables modified, with more low range throttle while staying mild for crawling
• Fan on and off temps lowered from 203/198°F to 185/180°F, speed limiters removed, rev limit raised from 8000 to 8800 RPM
• Safety parameters that protect the motor stay in place. Tested on the dyno and in the field with data logging.

Fits

• Can-Am Commander 1000R with a Dynojet PVCX, PV3 or PV4 already in hand

In the box

• AA tune files for the Commander 1000R, sent by email

Good to know

• This is a tune file only, for an existing Power Vision device. No tuner is included.
• After purchase the store contacts you by email to collect your vehicle and Power Vision device information (the PV_INFO file for PV3, or the shared vehicle info from the PV4 app), then sends your tune files by email.
• Level 1: for stock exhaust systems only. Available in 87 octane or 91 to 93 octane.
• Level 2: for aftermarket slip on or full exhaust systems only. Available in 87 octane or 91 to 93 octane.
• Tuning a second vehicle with a PV3 has restrictions. A PV4 will prompt you to buy a license for an additional vehicle.
• Tunes are final sale.