• AA clutch breather tube installed under the clutch pre filter on a RZR XP Turbo
  • Breather port installed in the RZR XP Turbo clutch cover
  • Clutch vent outlet on the RZR XP Turbo
  • Breather tube clamped to the clutch cover port
1 4

Aftermarket Assassins

RZR XP Turbo Clutch Breather

RZR XP Turbo Clutch Breather

108-1011

$150.00 USD
$150.00 USD
Sale Sold out
Shipping calculated at checkout.
Part Number

Don't see your machine or the part you need? Ask us and we'll track it down.

The Aftermarket Assassins Clutch Breather adds venting to the RZR XP Turbo clutch cover, where AA found the factory venting is not enough to properly cool the belt.

Why it holds up

  • Drops belt temps 20 to 30 degrees on average
  • 2.5 inch vent tube helps reduce temps with or without the AA CVT blower
  • Dirt and water tight
  • Fits under the factory clutch pre filter for a factory look
  • The factory outlet sits on the far side of the secondary, making it hard for air to escape on the plastic cover side. This vent solves that.

Fits

  • 2016 to 2018 Polaris RZR XP Turbo
  • Does not fit Turbo S

In the box

  • Breather tube and adapter
  • Worm clamp

Good to know

  • Some cutting of factory plastics is required.
  • You will need a 2 3/4 inch hole saw.
  • The 3 inch ID tube fits loosely over the 2.5 inch OD adapter. The supplied worm clamp makes up the half inch gap, and AA says it seals and works fine. If that does not suit you, skip this product.
  • Especially helpful when adding horsepower.
  • Part number 108-1011
View full details